The style and installation method of the pole anti-collision barrel

The color of the warning anti-collision barrel is yellow and black, which is very eye-catching in terms of three-dimensionality and vividness. A warning slogan is printed in the middle, and an emergency phone number of the equipment unit is printed at the bottom. The material of the facility is made of PVC reflective film. At night, under the illumination of lights, the anti-collision warning barrel has obvious reflective effect and prominent hinting, which can effectively prevent the collision between motor vehicles and utility poles. Due to the particularity of railway power supply equipment, the erection of power equipment must pass through villages, farmland and township roads. In order to prevent electric equipment from being collided by vehicles and agricultural implements, warning anti-collision buckets are generally installed at the roots of electric poles located on farmland and sidewalks. At the same time, because the warning anti-collision bucket is easy to install and has strong mobility, when the equipment in the pipe appears on the temporary construction access road, the warning anti-collision bucket can be installed in time, and it can be removed after the construction is completed.

01 Reasonable choice of installation location: Reasonable choice of installation location. According to the operating environment of the equipment, select the place where the anti-collision bucket needs to be warned, and select the necessary installation location as much as possible to avoid material waste and play the role of warning the anti-collision bucket.

02 Clean and install the pole root: Clean up the weeds, ridges and gravel at the pole root to ensure that the installation site is flat and free of foreign objects, and avoid the warning that the anti-collision bucket does not fit the pole surface after being installed.

03 Correctly choose the installation orientation: The warning anti-collision bucket can be divided into upper and lower parts. During installation, the direction must be adjusted to avoid the warning that the anti-collision bucket is installed reversely. At the same time, the contact number of the equipment management unit should be as far out as possible.

04 Tighten the anti-collision cylinder bolts: When tightening the warning anti-collision cylinder bolts, the screws must be tightened in sections from top to bottom, and cannot be tightened in place at one time. At the same time, the tightening screw must be constantly rocked to the warning bumper to ensure that it adheres tightly to the surface of the rod.